From b29818a144e7591e1728c1f7fa2b1fec0a026647 Mon Sep 17 00:00:00 2001 From: Tibo De Peuter Date: Sat, 25 Apr 2026 17:05:46 +0200 Subject: [PATCH] docs: Clarify input space in more detail --- docs/design/input_action_spaces.md | 95 +++++++++++++++++++++++++++--- 1 file changed, 88 insertions(+), 7 deletions(-) diff --git a/docs/design/input_action_spaces.md b/docs/design/input_action_spaces.md index 7860e16..8d24d37 100644 --- a/docs/design/input_action_spaces.md +++ b/docs/design/input_action_spaces.md @@ -5,13 +5,24 @@ space (outputs). The control models map these observations directly to physical **Inputs (state space)** -The observation space provides the agent with its current physical state and its objective. +The observation space provides the agent with its current physical state and its navigational objective. With a +decentralized control architecture in mind, we divide these inputs into global and local states. -- Joint positions: the current angles of all joints in the morphology. -- Joint velocities: the current moving speed of the joints. -- Goal vector: instad of just a scalar distance, the goal is represented asa a vector (distance and ange/direction) to +Global inputs, always broadcasted to all nodes: + +- Vertical orientation/tilt: A single, simplified metric representing the tilt or vertical alignment of the agent's + central body/disk, derived from the environment's raw disk rotation 3D vector $[roll, pitch, yaw]$: + $$tilt = sqrt(roll^2 + pitch^2)$$. This represents the deviation from the global Z-axis. +- Goal vector: Instead of just a scalar distance, the goal is represented asa a vector (distance and ange/direction) to the target. +Local inputs, routed directly to specific nodes: + +- Joint positions: The current angles of all joints within the morphology. +- Joint velocities: The current angular velocities of the joints. +- Joint actuator forces: The physical forces currently exerted at each specific joint. +- Segment contact: These values indicate whether each physical segment of the agent is currently touching the ground. + **Outputs (action space)** The action space defines how the agent interacts with the environment. @@ -26,15 +37,34 @@ When designing the state space, we must ask: *Could a human operator perform thi providing only the joint position is insufficient to determine the direction a limb is currently moving. By explicitly including joint velocities, the agent can immediately infer momentum and movement direction without needing to memorize past states. -- Goal Vector (Distance + Angle): Providing only the scalar "distance to the goal" as an input is akin to blindfolding - the robot and asking it to find a target by playing "hot or cold." By providing a full vector, the agent knows - exactly where the target is relative to its current orientation, allowing for directed and efficient locomotion. - Absolute Joint Offsets: The physical Brittle Star robot relies on servo motors (if we were to build this simulated robot), which are inherently position-controlled devices. (Continuous rotation servos exist, but they are less commonly used for joints.) If our network outputted continuous torques (forces), a significant portion of the reinforcement learning process would be wasted on learning low-level PID control dynamics (i.e., how much force to apply to hold a position). Abstracting this away forces the learning algorithm to focus entirely on higher-level gait generation and locomotion. +- Simplified vertical orientation: We drop the full 3D spatial rotation and angular velocity arrays in favor of a + single vertical orientation metric (tilt). For a brittle star moving accross a flat plane, this metric is sufficient + for the agent to sense if it is losing balance or flipping over. +- Force representation: We strictly retain the joint actuator forces and drop the more generic actuator force. Forces + that are explicitly tied to individual joints are significantly easier to route into decentralized, local limb nodes, + which is necessary for our message-passing architecture. +- Goal Vector (Distance + Angle): Providing only the scalar "distance to the goal" as an input is akin to blindfolding + the robot and asking it to find a target by playing "hot or cold." By providing a full vector, the agent knows + exactly where the target is relative to its current orientation, allowing for directed and efficient locomotion. + + The goal representation is explicitly divided into a directional vector and a scalar distance. Keeping the direction + as a normalized unit vector bounds the values to the $[-1, 1]$ range, which stabilizes neural network training. + Providing only a scalar "distance to the goal" would force the agent to learning localized searching behaviors (e.g. + random walks or spiraling) to deduce the direction, drastically increasing the difficulty of the learning task. +- Contact sensors: Segment contact detects external ground interaction and is biologically vital for timing gait + transitions. + + +Specifically, we do not include some available inputs: + +- Global position: Absolute spatial coordinates can cause the agent to overfit to a specific coordinate frame or map, + rather than learning general, adaptable locomotion strategies. ## Limitations and alternatives @@ -50,3 +80,54 @@ Alternative state and action formulations include: - Scalar Goal Distance: Giving the agent only the scalar distance to the target would force it to learn a localized searching behavior (e.g., spiraling or random walks) to determine the correct direction. While biologically plausible for simpler organisms following chemical gradients, it drastically increases the difficulty of the learning task. + +## MuJoCo + +This is what the filtered input vectors look like in MuJoCo, with $J$ joints and $S$ segments: + +- `joint_position`: shape=(J,), dtype=float64 +- `joint_velocity`: shape=(J,), dtype=float64 +- `joint_actuator_force`: shape=(J,), dtype=float64 +- `segment_contact`: shape=(S,), dtype=float64 +- `unit_xy_direction_to_target`: shape=(2,), dtype=float64 +- `xy_distance_to_target`: shape=(1,), dtype=float64 +- `disk_z_tilt`: shape=(1,), dtype=float64, derived from `disk_rotation` + +This brings the entire input space down to $3J + S + 4$ float64's, compared to $4J + S + 15$ float64's for the +unfiltered inputs. + +For reference, these are all the inputs that are available in the MuJoCo environment: + +``` +obs keys: ['joint_position', 'joint_velocity', 'joint_actuator_force', 'actuator_force', 'disk_position', 'disk_rotation', 'disk_linear_velocity', 'disk_angular_velocity', 'tendon_position', 'tendon_velocity', 'segment_contact', 'unit_xy_direction_to_target', 'xy_distance_to_target'] + +raw observations dict: +{'joint_position': array([0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.]), + 'joint_velocity': array([0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.]), + 'joint_actuator_force': array([0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.]), + 'actuator_force': array([0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.]), + 'disk_position': array([0. , 0. , 0.11]), + 'disk_rotation': (0.0, -0.0, 0.0), + 'disk_linear_velocity': array([0., 0., 0.]), + 'disk_angular_velocity': array([0., 0., 0.]), + 'tendon_position': array([], dtype=float64), + 'tendon_velocity': array([], dtype=float64), + 'segment_contact': array([0., 0., 0., 0., 0., 0.]), + 'unit_xy_direction_to_target': array([-0.95333378, -0.30191837]), + 'xy_distance_to_target': array([3.])} + +(shapes) +joint_position: shape=(12,), dtype=float64, size=12 +joint_velocity: shape=(12,), dtype=float64, size=12 +joint_actuator_force: shape=(12,), dtype=float64, size=12 +actuator_force: shape=(12,), dtype=float64, size=12 +disk_position: shape=(3,), dtype=float64, size=3 +disk_rotation: shape=(3,), dtype=float64, size=3 +disk_linear_velocity: shape=(3,), dtype=float64, size=3 +disk_angular_velocity: shape=(3,), dtype=float64, size=3 +tendon_position: shape=(0,), dtype=float64, size=0 +tendon_velocity: shape=(0,), dtype=float64, size=0 +segment_contact: shape=(6,), dtype=float64, size=6 +unit_xy_direction_to_target: shape=(2,), dtype=float64, size=2 +xy_distance_to_target: shape=(1,), dtype=float64, size=1 +```